Change File To Open With Windows Shell Common Dll Download
There are several ways to send and receive a blocked file. You can save the file to the cloud and send a link to the file, use a file compression utility like WinZip, or even rename the file with another extension, then have your recipient change the name back to the original name after they receive the file.
Change File To Open With Windows Shell Common Dll Download
Save the file to the cloud If you need to send a file that's blocked by Outlook, the simplest way to send your file is to upload it to OneDrive or a secure network share server such as SharePoint. Then send a link to the file. If you need to receive a blocked file, ask the sender to upload the file to OneDrive or SharePoint and send you a link. Once you receive the link, you can open the file location and download the file.
To deal proactively with the consequences of a change to default programs, you can use HKEY_CLASSES_ROOT\SystemFileAssociations to register verbs and other association information. Due to their location after the ProgID in the association array, these registrations are lower priority. These SystemFileAssociationsregistrations are stable even when users change the default programs, and provide a location to register secondary verbs that will always be available for a particular file type. For a registry example, see Registering a Perceived Type later in this topic.
The method in that article assumes you can select a program, such as Notepad, to move to for the file associations. The one in my question is the default for .config files and as noted is what looks like an oblique reference to the Windows Shell Common Dll, but you cannot change it to that in the UI for the file by pointing to shell32.dll - that throws an error that it cannot be called directly.
A DLL file contains data and sets of functions that other programs in Windows use on a daily basis. For example the dialog boxes that you interact with in Windows use various functions from the Comdlg32 DLL file. Every process in Windows depends on a DLL(s) one way or the other. The Windows Shell Common DLL is not responding error that we are here to resolve indicates that the Windows Shell Common DLL has crashed due to some error. A little dialog box appears that shows you this message. You can check its solution online from that dialog box or you can close that dialog box. For many users they may never see this error again but for some it becomes a routine problem that appears every time you try to make certain changes in the Windows.
Read NextFix: Windows Shell Experience Host has Stopped Working
Fix: Shell Infrastructure Host has stopped working
How to Fix Common Audio Interface Issues in Windows 10
The Most Common Blue Screen Errors on Windows 7, 8 and 10
.no-icon:beforedisplay:none; By Kamil AnwarNovember 20, 2022 5 minutes readKamil is a certified Systems Analyst "@context":"http:\/\/schema.org","@type":"Article","dateCreated":"2016-07-09T08:43:13-05:00","datePublished":"2016-07-09T08:43:13-05:00","dateModified":"2022-11-20T09:55:56-06:00","headline":"FIX: Windows Shell Common DLL has stopped working","keywords":,"url":"https:\/\/appuals.com\/windows-shell-common-dll-has-stopped-working\/","description":"A DLL file contains data and sets of functions that other programs in Windows use on a daily basis. For example the dialog boxes that you interact with in Windows use various functions from the Comdlg","articleSection":"Microsoft Windows","articleBody":"A DLL file contains data and sets of functions that other programs in Windows use on a daily basis. For example the dialog boxes that you interact with in Windows use various functions from the Comdlg32 DLL file. Every process in Windows depends on a DLL(s) one way or the other. The Windows Shell Common DLL is not responding error that we are here to resolve indicates that the Windows Shell Common DLL has crashed due to some error. A little dialog box appears that shows you this message. You can check its solution online from that dialog box or you can close that dialog box. For many users they may never see this error again but for some it becomes a routine problem that appears every time you try to make certain changes in the Windows.\r\n\r\n\r\n\r\nThis crash is usually preceded by the user attempt to make changes in the configurations of their audio devices i.e. playback or recording devices. The Configuration dialog box may open alright but if you click inside it The Windows Shell Common DLL is not responding error will be shown to you and the configuration window will be closed.\r\n\r\nThat configuration window directly accesses the audio device\u2019s driver so if that driver is corrupted or is not compatible with the way Windows works then it may crash the DLL process and give you that error. For some most of the users the error went away after a few instances but for the rest, following are the solutions that are known to work against this error.\r\nSolution 1: Install Appropriate Drivers\r\nIncompatible audio device drivers are known to operate against the method that Windows 7 and later operating systems follow. So you will have to make sure you are using a stable version of drivers instead of any Beta version. You can download earlier version of the drivers for your operating system from the computer model manufacturer\u2019s website and install it through device Manager.\r\n\r\nIf your audio devices are old, you can also try the Microsoft Vista\u2019s driver for them instead if the drivers for newer operating system are unavailable. You can download them from your computer model manufacturer\u2019s website too.\r\n\r\nTo install them, Press and Hold the Windows key and Press R. Type devmgmt.msc in the Run dialog box and Press Enter.\r\n\r\nIn the Device Manage window that opens, Double Click on Sound, video and game controllers.\r\n\r\nUnder it, Right Click on High Definition Audio and click Update Driver Software from the pop up menu.\r\n\r\nClick Browse my computer for driver software and navigate to the location where you downloaded the drivers. Select the Drivers and proceed with the On screen instructions.\r\n\r\nIf you do not have the drivers, then you should check on the system manufacturer's site for the drivers. Usually, you would put in the model number to pull up the system configuration on the manufacturer's site from where you can download the drivers.\r\n\r\nIf this error appears when you are trying to connect USB Headphones then do trying inserting them into the USB 3.0 drivers if available as this known to resolve this issue.\r\nSolution 2: Disable Any Audio Effect\r\nDue to driver incompatibility, If you have applied any kind of effect on the audio, for example changed the mode in equalizer, then this can also be contributing to the Windows Shell Common Error.\r\n\r\nMake sure all these audio effects are Off. Also Turn Off any feature similar to Enhanced Audio or such.\r\nSolution 3: Run The SFC Scan\r\nThis scan checks the integrity of crucial Windows files including all the DLLs. Follow the steps here to run an SFC scan.\r\nSolution 4: Configure Windows to accept certificates\r\nIn the case of many Windows users, their computers are, by default configured to block any and all certificates. Windows depends heavily on certificates to verify the identity of not only users but also of installed devices and drivers. That being the case, Windows being configured to block all certificates can lead to the Operating System not being able to verify the identities of certain devices (such as playback and recording devices) and\/or their drivers, causing the user to be met with the Windows Shell Common DLL has stopped working error message whenever they try to adjust the settings of the affected devices.\r\n\r\nIf that is the case, using Windows PowerShell to configure Windows to accept some, if not all, certificates should be able to resolve this issue for you. In order to use this solution, you need to:\r\n\r\n \tOpen the Start Menu.\r\n \tSearch for \u201cpowershell\u201d.\r\n \tRight-click on the search result titled Windows PowerShell and click on Run as administrator in the context menu.\r\n \tType the following into Windows PowerShell and press Enter:\r\n\r\nSet-ExecutionPolicy -ExecutionPolicy Unrestricted -Scope CurrentUser\r\n\r\n \tOnce the command has been executed, close Windows PowerShell and restart your computer.\r\n\r\nCheck to see whether or not the issue has been fixed once your computer boots up.\r\nSolution 5: Performing a Clean Boot\r\nIt is possible that a third party application or service might be interfering with certain elements of the operating system, Therefore, in this step, we will be running a clean boot to isolate the application\/service causing this error. For that:\r\n\r\n \tLog in to the computer with an Administrator account.\r\n \tPress \u201cWindows\u201d + \u201cR\u201d to open up the \u201cRUN\u201d prompt.\r\n\r\n\r\n \tType in \u201cmsconfig\u201d and press \u201cEnter\u201c.\r\n\r\n\r\n \tClick on the \u201cServices\u201d option and uncheck the \u201cHide all Microsoft Services\u201d button.\r\n\r\n\r\n \tClick on the \u201cDisable All\u201d option and then on \u201cOK\u201c.\r\n\r\n\r\n \tClick on the \u201cStartup\u201d tab and click on the \u201cOpen Task Manager\u201d option.\r\n\r\n\r\n \tClick on the \u201cStartup\u201d button in the task manager.\r\n \tClick on any application in the list that has \u201cEnabled\u201d written next to it and select the \u201cDisable\u201d option.\r\n\r\n\r\n \tRepeat this process for all applications in the list and restart your computer.\r\n \tNow your computer has been booted in the \u201cClean Boot\u201d state.\r\n \tCheck to see if the issue goes away.\r\n \tIf the error isn't encountered anymore, start enabling the services one by one and identify the service by enabling which the error comes back.\r\n \tEither, reinstall the service or keep it disabled.\r\n\r\nSolution 6: Reinstalling Synaptics Touchpad Driver\r\nThe Synaptic Touchpad driver is known to sometimes cause the \"Windows Shell Common DLL has stopped working\" error. Therefore, in this step, we will be reinstalling the driver. For that:\r\n\r\n \tPress \"Windows\" + \"R\" buttons simultaneously to open the Run prompt.\r\n\r\n\r\n \tType in \"devmgmt.msc\" and press \"Enter\".\r\n\r\n\r\n \tDouble click on the \"Mouse and Other Pointing Devices\" dropdown and right-click on the \"Synaptics Touchpad\" driver.\r\n\r\n\r\n \tSelect \"Uninstall\" and click on \"Yes\" in the prompt.\r\n\r\n\r\n \tFollow the on-screen instructions to completely uninstall the driver.\r\n \tNavigate back to the device management window and click on the \"Actions\" tab on the top.\r\n \tSelect \"Scan for Hardware Changes\" from the list to reinstall the driver.\r\n\r\n\r\n \tCheck to see if the issue persists.\r\n","publisher":"@id":"#Publisher","@type":"Organization","name":"Appuals.com","logo":"@type":"ImageObject","url":"https:\/\/appuals.com\/wp-content\/uploads\/2022\/10\/apuals_new_logo_B-1.png","publishingPrinciples":"https:\/\/appuals.com\/about\/#go-to-editorial-guidelines","sameAs":["https:\/\/facebook.com\/appuals","https:\/\/twitter.com\/appuals","https:\/\/www.linkedin.com\/company\/appuals\/","https:\/\/www.youtube.com\/channel\/UCR--2QnA0vYBfqsmSI3pQ9g","https:\/\/www.crunchbase.com\/organization\/appuals"],"author":"@type":"Person","name":"Kamil Anwar","url":"https:\/\/appuals.com\/author\/kamilanwar\/","description":"Kamil is a certified MCITP, CCNA (W), CCNA (S) and a former British Computer Society Member with over 9 years of experience Configuring, Deploying and Managing Switches, Firewalls and Domain Controllers also an old-school still active on FreeNode.","jobTitle":"Systems Analyst","sameAs":["https:\/\/www.facebook.com\/kamilanwar","https:\/\/www.linkedin.com\/in\/kamil-anwar-b60791173\/"],"knowsAbout":["Microsoft, Linux, FreeBSD, Solaris, PC Hardware, Cisco"],"alumniOf":"@type":"Organization","Name":"London Metropolitan University","mainEntityOfPage":"@type":"WebPage","@id":"https:\/\/appuals.com\/windows-shell-common-dll-has-stopped-working\/","breadcrumb":"@id":"#Breadcrumb","image":"@type":"ImageObject","url":"https:\/\/cdn.appuals.com\/wp-content\/uploads\/2016\/07\/Windows-Shell-Common-DLL-has-stopped-working.png","width":1200,"height":207 Facebook Twitter LinkedIn Reddit Share via Email Print ABOUT THE AUTHOR Kamil AnwarSystem Analyst Microsoft Certified Professional Email Facebook LinkedIn Kamil is a certified MCITP, CCNA (W), CCNA (S) and a former British Computer Society Member with over 9 years of experience Configuring, Deploying and Managing Switches, Firewalls and Domain Controllers also an old-school still active on FreeNode. Load Comments Microsoft WindowsWindows High CPU Usage
Windows EXE File Errors
Windows Blue Screen
Windows File Information
Virus & Malware Removal
Programs and Apps